Erase Pin Codes; Erase Rfid Tag - Tele Radio TG-T12-20 Installation Instructions Manual

Select...
[Stored PIN]
[Any PIN]
[Any keyring]
[Any walltag]
[Stored RFID]
[Allow skip]
9. Select by pressing side button 4.
10. Confirm by pressing side button 4.
ERASE PIN CODES
1. Make sure that the stop button is pressed.
2. Pull out the stop button.
3. Press side button 3. Keep pressed.
4. Press the stop button.
5. Release side button 3.
6. Go to [PIN] --> [Erase PIN].
7. Select by pressing side button 4.
8. Scroll the list to select the PIN code that you want to erase.
9. Confirm by pressing side button 4.
ERASE RFID TAG
1. Make sure that the stop button is pressed.
2. Pull out the stop button.The LEDs light (green when the battery capacity is good, red when the
battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The LEDs light (green when the battery capacity is good, red when the battery capacity is poor) when in
menu mode.
6. Go to [Erase RFID].
Chapter 4: INSTALLERS GUIDE
to...
Only PIN codes registered in the transmitter will
be accepted
Any PIN code will be accepted
Any Tele Radio keyring tag will be accepted
Any Tele Radio wall tag will be accepted
Only stored RFID keyring tags or wall tags will be
accepted
Allows to skip any start-up authorization
- 49 -