Chapter 6: Load Select Modes - Tele Radio TG-T12-20 Installation Instructions Manual

CHAPTER 6: LOAD SELECT MODES

MAKE A LOAD SELECTION
NOTE! Before starting to perform these settings, make sure that the stop relays are deactivated!
1. Make sure that the stop button is pressed.
2. Pull out the stop button.
3. Press side button 3. Keep pressed.
4. Press the stop button.
5. Release side button 3.
6. Go to [Load Selection].
7. Select Load selection 0-7.
8. Confirm by pressing side button 4.
LOAD SELECT MODE 0
Chapter 6: LOAD SELECT MODES
- 65 -