Table of Contents
Advertisement
RELAY FUNCTIONALITY
NOTE! If Operating mode 0 is selected, you can not make these settings. Contact your representative
for assistance.
NOTE! Momentary relay functionality is default. That means that the relay will only be activated when
you press a button on the transmitter. When the button is released, the relay deactivates. Setting a relay
to latching means that the relay gets activated every time that you press a button, but in this case the
relay remains active until the button is pressed again.
NOTE! Before starting to perform these settings, make sure that the stop relays are deactivated!
NOTE! The settings options depend on the selected Operating mode.
Momentary and latching relay functionality
NOTE! Not available on receivers TG-RX-MNLCAN, TG-RX-MNRCAN,TG-RX-MNPCAN, TG-RX-
MNLJ1939, TG-RX-MNRJ1939, TG-RX-MNPJ1939
1. Press the receiver Function button 5 times. Function LED 5 flashes red.
2. Relay LEDs 1-19 light when the corresponding relay has a latching functionality:
Relay LED OFF= momentary relay functionality.
Relay LED ON= latching relay functionality.
3. Press the receiver Select button to switch relay functionality.
4. The relay LED for the first relay available flashes. If that relay is momentary, function LED 5 is off. If
that relay is latching, function LED 5 lights.
5. Press the receiver Function button if you want to switch functionality. The status of function LED 5
changes.
6. Press the receiver Select button to step to the next available relay. When you have stepped through
all the available relays, the receiver exits the LED menu and restarts.
Interlocking
What function relays that are available for interlocking, i.e. that can be blocked or prioritized when
pressed at the same time, depends on what Operating mode that is selected in the receiver. The relays
that have a direction function have automatic interlocking between opposite directions, e.g. up and
down. The relays that have a button function can be interlocked. Interlocking between relays is made in
the PC program Settings manager.
- 58 -
Advertisement
Table of Contents
