Press button
To
1
count -1
2
count +1
3
go left
4
go right
8.Press the left start button.
The display shows [Replacing] while the process is ongoing.
If the replacement fails, the display shows [FAILED].The transmitter turns off.
If the replacement succeeds, the display shows [OK]. The transmitter turns off.
AUTOMATIC SHUTDOWN
Turning on automatic shutdown can save battery capacity by automatically turning the
transmitter off when no function has been activated for a set time.
Set the time for automatic shutdown
1. Start the transmitter.
2. Enter menu mode.
3. Go to [Auto Shutdown]. Select by pressing t he left start button.
4. Select the time that you want for automatic shutdown: 0-255 minutes. If you want to turn off
automatic shutdown, select 0. Confirm by pressing t he left start button.
FREQUENCIES & CHANNELS
NOTE! If your system is transmitting on the frequency bands 433MHz eller 2.4 GHz, the receiver
will automatically detect and switch to the same channel that the transmitter is using. If your
system is transmitting the 915 MHz frequency band, you have to switch bank in the receiver by
using the PC program Settings manager. Contact your representative for assistance.
Switch channel on the transmitter
1. M ake sure that the stop button is pressed.
2. Pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is
poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is
poor) when in menu mode.
- 13 -