Automatic Shutdown - Tele Radio TIGER G2 Installation Instructions Manual

2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Replace].
7. Select by pressing the left start button.
8. Enter the serial number/ID code for the transmitter that you want to replace by pressing the buttons
according to the table below:
Press... to...
Button 1 Count -1
Button 2 Count +1
Button 3 Go left
Button 4 Go right
9. Press the left start button.
The display shows [Replacing] while the process is ongoing.
If the replacement fails, the display shows [FAILED].The transmitter turns off.
If the replacement succeeds, the display shows [OK]. The transmitter turns off.

AUTOMATIC SHUTDOWN

NOTE! Turning on automatic shutdown can save battery capacity by automatically turning the
transmitter off when no function has been activated for a set time.
Set the time for automatic shutdown
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Auto Shutdown].
- 54 -