Tele Radio T70 Jaguar Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Tele Radio Manuals
  4. Remote Control
  5. T70 Jaguar
  6. Installation instructions manual
Tele Radio T70 Jaguar Installation Instructions Manual

Tele Radio T70 Jaguar Installation Instructions Manual

Hide thumbs Also See for T70 Jaguar:
Table of Contents

Advertisement

Quick Links

See also: Manual
Tele Radio T70 Jaguar
INSTALLATION INSTRUCTIONS
ENGLISH (ORIGINAL)
ARTICLE CODE: T70TX-08ERB2, T70RX-09SB, T70RX-15SB
IM-T70-RX003-A4-EN
FOR
RX2-A, RX3-A, TX2
1
2
1
2
3
4
5
6
7
8

Advertisement

Table of Contents
loading

Related Manuals for Tele Radio T70 Jaguar

Summary of Contents for Tele Radio T70 Jaguar

  • Page 1 Tele Radio T70 Jaguar INSTALLATION INSTRUCTIONS RX2-A, RX3-A, TX2 ENGLISH (ORIGINAL) ARTICLE CODE: T70TX-08ERB2, T70RX-09SB, T70RX-15SB IM-T70-RX003-A4-EN...
  • Page 2 Thank you for puchasing a Tele Radio product T70TX-08ERB2, T70RX-09SB, T70RX-15SB READ ALL INSTRUCTIONS CAREFULLY BEFORE MOUNTING, INSTALLING AND CONFIGURATING THE PRODUCT. These instructions are published by Tele Radio AB without any guarantee. These handed to end users. ©Tele Radio AB, 2010 TELE RADIO AB The helpdesk group can help you with questions regarding service and technical support.

  • Page 3: Table Of Contents

    CONTENTS Technical data Install batteries FCC- and IC labels Positions of product labels Frequency settings Function selection Change of LED that lights up during startup Latching relay function Interlocking relay function Guarantee Contents...
  • Page 4 FREQUENCY TABLE CHANNEL FREQ.BANK 1 OPTION CHANNEL FREQ.BANK 2 OPTION CHANNEL FREQ.BANK 3 OPTION CHANNEL OPTION Frequency table...
  • Page 5 RECEIVER T70RX-09SB Power supply LED Code storing LED Latch LED Interlocking LED Logout LED switch Antenna connector Function button NO NC 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 26 27 28 29 30 31 32 33 Select button...
  • Page 6 TRANSMITTER T70-08ERB2 STOP button yellow LED 1 yellow LED 2 red/green LED button 7- START button button 8- START button SETTINGS DOCUMENT Tele Radio RECEIVER(S) SETTINGS DOCUMENT RECEIVER 1 Article no: TRANSMITTER(S) Series no: TRANSMITTER 1 Operating Mode: Article no:...

  • Page 7: Technical Data

    TECHNICAL DATA The system CHANNEL SEPARATION: 25 kHz. Receiver T70RX-09SB/ RX2-A 9 relays Transmitter WEIGHT: 250 g./ 8.8 oz. RECEIVER POWER SUPPLY POWER MIN. CURRENT MAX. CURRENT SUPPLY CONSUMPTION CONSUMPTION 12V DC 115V AC 230V AC STOP BUTTON TEST IMPORTANT! 200 hours.
  • Page 8 CONNECT THE SYSTEM CONNECT THE RECEIVER INSTALL RECEIVER AND ANTENNA Place as high as possible off the ground. In as free position as possible. Check that there is a good connection between the antenna and the chassis. IMPORTANT!

  • Page 9: Install Batteries

    INSTALL BATTERIES 3 x 1.5V AA For optimum performance, use alkaline batteries. FCC- AND IC LABELS HOW TO REMOVE THE RUBBER COVER HOW TO REMOVE THE RUBBER COVER 1. Loosen the rubber cover, starting at the top. 2. Lift the transmitter up out of the rubber cover. Fcc- and ic labels...

  • Page 10: Positions Of Product Labels

    FCC STATEMENT This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may cause undesired operation Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
  • Page 11 STARTING/ TURNING THE TRANSMITTER OFF STARTING 1. Pull out the STOP button. 2. Press the START buttons 7 and 8 for at least 1 second. TURNING OFF 1. Press the STOP button. is pressed, all relays go off. ‘ AUTOMATIC SHUTDOWN SETTINGS...

  • Page 12: Keep Button 8 Pressed. Release Button

    CHANGE AUTOMATIC SHUTDOWN TIME for at least 1 second. 2. Keep button 8 pressed. Release button 7. 3. Release button 8. Within 0.3 seconds: Press button 3. start up transmitter LED transmitter LED 5. Enter your choice 1-5: ______________________...

  • Page 13: Frequency Settings

    FREQUENCY SETTINGS SWITCH FREQUENCY BANK 1 second. 2. Keep button 8 pressed. Release button 7. 3. Release button 8. Within 0.3 seconds: Press button 2. Frequency settings...
  • Page 14 SETTINGS TO MOVE UP AND DOWN WITHIN A FREQUENCY BANK section if you do not want to change the default settings. 1. SAVE NEW FREQUENCY 2. TEMPORARY MOVE 3. OFF least 1 second. Release button 7. Keep button 8 pressed. Release button 8.
  • Page 15 Enter your choice: ______________________ 1. SAVE NEW FREQUENCY 2. TEMPORARY MOVE 3. OFF MOVE UP AND DOWN WITHIN A FREQUENCY BANK 1. S 7 and 8 for at least 1 second. 2. Release button 7. Keep button 8 pressed. 1a. Keep button 8 pressed. within the frequency.
  • Page 16 1b. Keep button 8 pressed. frequency. 2. Release all buttons. CHECK THE FREQUENCY ON THE TRANSMITTER to send within. 1. S 1 second. 2. Release button 7. Keep button 8 pressed. 3. Release button 8. Within 0.3 seconds: Press button 2. starts up.
  • Page 17 sending on. Frequency settings...

  • Page 18: Function Selection

    FUNCTION SELECTION be controlled. Function selection 1 Function selection 2 Press button 8, light up yellow Function selection 3 Press button 8, light up yellow Function selection 4 pressing button 8. Choose Function selection for the transmitter Press the start-buttons 7+8 for at least 1 sec. Release button 7, keep button 8 pressed.
  • Page 19 OPERATING MODE OVERVIEW TRANSMITTERS RECEIVERS RELAYS FUNCT. LATCHING INTER- MODE SELECT. LOCKING 9/15 possible possible 9/15 possible special possible special possible possible possible possible possible...
  • Page 20 OPERATING MODE 2 RECEIVERS: 9/15 relays TRANSMITTERS: CONTROL: LATCHING: INTERLOCKING: 4/10 5/11 6/12 7/13 FUNCTION SELECT: EXTRA: pressed. 8/14 9/15 when the start- buttons 7+8 are pressed. RECEIVER DIPSWITCH Switch 7: ON: No time out on relay 1. Only a STOP command from a logged on transmitter will turn relay 1 off.
  • Page 21 OPERATING MODE 3 RECEIVERS: 9/15 relays TRANSMITTERS: CONTROL: LATCHING: INTERLOCKING: FUNCTION SELECT: EXTRA: pressed. 10/12 11/12 when the start- buttons 7+8 are pressed. RECEIVER DIPSWITCH Switch 5: ON: Button 8 activates relay 14 (latching) and relay 15 (momentary). OFF: No function on relay 14 or 15. Switch 6: ON:A time delay of 500 ms.
  • Page 22 OPERATING MODE 4 RECEIVER MODELS: 15 relays TRANSMITTERS: CONTROL: LATCHING: Special latching on INTERLOCKING: FUNCTION SELECT: EXTRA: 10/12 11/12 pressed. Toggle when the start- button buttons 7+8 are pressed. Special relay function See Function selection chapter RECEIVER DIPSWITCH Switch 6: ON:A time delay of 500 ms.
  • Page 23 OPERATING MODE 5 15 relays RECEIVER MODELS: TRANSMITTERS: CONTROL: LATCHING: INTERLOCKING: 11/12/13 8/10 9/10 FUNCTION SELECT: EXTRA: 11/13 12/13 when the start- buttons 7+8 are pressed RECEIVER DIPSWITCH Switch 5: ON: Button 8 activates relay 14 (latching) and relay 15 (momentary). OFF: No function on relay 14 or 15.
  • Page 24 OPERATING MODE 6 RECEIVER MODELS: 15 relays TRANSMITTERS: CONTROL: LATCHING: Special latching on INTERLOCKING: 11/12/13 8/10 9/10 FUNCTION SELECT: EXTRA: 11/13 12/13 pressed. Toggle button when the start- buttons 7+8 are Special relay function See Function selection chapter RECEIVER DIPSWITCH Switch 6: ON:A time delay of 500 ms.
  • Page 25 OPERATING MODE 7 RECEIVER MODELS: 9 relays TRANSMITTERS: CONTROL: LATCHING: Possible on 2-15 INTERLOCKING: Possible on 2/3/10/11, 2/10 3/11 4/12 5/13 FUNCTION SELECT: EXTRA: 6/14 7/15 RECEIVER DIPSWITCH Switch 7: ON: No time out on relay 1. Only a STOP command from a logged on transmitter will turn relay 1 off.
  • Page 26 OPERATING MODE 8 15 relays RECEIVER MODELS: TRANSMITTERS: CONTROL: LATCHING: INTERLOCKING: FUNCTION SELECT: 8/10 9/10 EXTRA: 11/13 12/13 when the start- buttons 7+8 are pressed 4/13 5/14 13/15 14/15 6/15 6/15 10/12 11/12 10/12 11/12 10/12 11/12 Toggle Toggle Toggle button button button...
  • Page 27 OPERATING MODE 10 15 relays RECEIVER MODELS: TRANSMITTERS: CONTROL: LATCHING: Possible on 2-15 INTERLOCKING: 8/10 9/10 FUNCTION SELECT: 11/13 12/13 Select function bank Bank Bank RECEIVER DIPSWITCH Switch 7: ON: No time out on relay 1. Only a STOP command from a logged on transmitter will turn relay 1 off.

  • Page 28: Change Of Led That Lights Up During Startup

    CHANGE OF LED THAT LIGHTS UP DURING STARTUP ter i started. If you want to keep the default setting, skip this section. 1. No yellow LED lights up at start 2. Yellow LED 1 lights up at start 3. Yellow LED 2 lights up at start 1 second.
  • Page 29 POWER SAVING FOR TRANSMITTER LEDS When the transmitter is in Standby mode (i.e. not transmitting) the default setting is that the selected yellow LEDs are continuously lit. You can increase the battery life by changing the settings. If you want to keep the default setting, skip this section.

  • Page 30: Latching Relay Function

    LATCHING RELAY FUNCTION In some Operating Modes you can assign a latching function to certain relays (see description of Operating Modes). Latching means that the relay is activated every time a button is pressed, but remains active until the button is pressed again. You can set this on the receiver using the FUNCTION button and the SELECT button.

  • Page 31: Interlocking Relay Function

    INTERLOCKING RELAY FUNCTION relays are interlocked, nothing will happen if the user presses both buttons button and the SELECT button. 1. Use the FUNCTION button to switch between the 3 function LEDs: A. the red code storing LED B. the yellow latch LED C.
  • Page 32 REGISTER THE TRANSMITTER IN THE RECEIVER IMPORTANT! Do not register the transmitter in the receiver until you have selected Operating Mode. NOTE! If you are going to register the transmitter in 2 receivers and have chosen Function selection 2-4, make sure that the correct yellow transmitter-LED is lit when registering the transmitter.
  • Page 33 ERASE TRANSMITTERS 0.3 seconds. 2. Press the SELECT button. MASTER RESET OF THE RECEIVER SETTINGS 1. Press both the FUNCTION button and the SELECT button. 2. Hold down the FUNCTION button...
  • Page 34 LOGOUT TRANSMITTERS LOGOUT 1 2 seconds. LOGOUT 2- ONLY IF BUTTON 7 IS NOT USED FOR A HIGH-RISK FUNCTION 2. Press button 7. 3. Press the STOP button without releasing button 7. LOGOUT 3- IF TRANSMITTER CANNOT BE USED...
  • Page 35 REPLACE TRANSMITTERS NOTE! The new transmitter must use the same frequency bank as the transmitter that is being replaced. 3. Within 2 seconds:...
  • Page 36 BATTERY INSTRUCTION Risk of explosion if battery is replaced with a battery of an incorrect type. DISPOSAL DISPOSAL OF BATTERIES DISPOSAL OF ELECTRONICS disposal of electronics in your region. Disposal...

  • Page 37: Guarantee

    GUARANTEE Tele Radio. SERVICING & REPAIRS OPERATING GUIDELINES Keep the product in a dry, clean place. Make sure that contacts and antennas are kept clean. SAFETY GUIDELINES Guarantee...
  • Page 39 TELE RADIO AB Sweden, Main office Tel. +46 (0)31-748 54 60 www.tele-radio.com e-mail: info@tele-radio.com TELE RADIO ASIA TELE RADIO TURKEY TELE RADIO SVERIGE TELE RADIO GmbH China Turkey Sweden Germany Tel. +86-(0)592-3111168 Tel. +90 216 574 22 94 Tel. +46 (0)31-724 98 00 Tel.

Table of Contents