Table of Contents
Advertisement
Chapter 4: INSTALLERS GUIDE
7. Scroll the list to select the RFID tag that you want to erase.
8. Select by pressing the left start button.
9. Confirm by pressing the left start button.
SHOW PIN CODES
1. Make sure that the stop button is pressed.
2. Pull out the stop button.
LED 1 + 2 light (green when the battery capacity is good, red when the battery capacity is poor).
3. Press side button 3. Keep pressed.
4. Press the stop button.
5. Release side button 3.
6. Go to [ PIN] --> [Show PIN].
7. The displays shows a list of registered PIN codes.
8. Press side button 3 to exit the menu. The transmitter turns off.
SHOW RFID TAGS
1. Make sure that the stop button is pressed.
2. Pull out the stop button.The LEDs light (green when the battery capacity is good, red when the
battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The LEDs light (green when the battery capacity is good, red when the battery capacity is poor) when in
menu mode.
6. Go to [Show RFID].
7. A list of registered RFID tags shows in the display.
- 50 -
Advertisement
Table of Contents
