REGISTER THE TRANSMITTER IN THE RECEIVER
1.
Press the receiver Function button until red LED 7 lights up.
2.
Press the receiver Select button until LEDs 1-5 light.
3.
Press any transmitter button, e.g. button 1 until LEDs 1-10 flash 3
times before going out.
ERASE ALL TRANSMITTERS FROM THE RECEIVER
1.
Press the receiver Function button and the Select button at the
same time until red LED 1-5 go out.
NOTE! If red LED 7 flashes slowly, one or several transmitters are still
registered in the receiver.
Settings
15