Erase Pin Codes; Show Registered Pin Codes - Tele Radio TG-T14-4 Installation Instructions Manual

ERASE PIN CODES
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.The LEDs light (green when the battery capacity is good, red when
the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The LEDs light (green when the battery capacity is good, red when the battery capacity is poor) when in
menu mode.
6. Go to [PIN] --> [Erase PIN].
7. Scroll the list to select the PIN code that you want to erase.
8. Select by pressing the left start button.
9. Confirm by pressing the left start button.
SHOW REGISTERED PIN CODES
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [PIN] --> [Show PIN].
7. The display shows a list of all registered PIN codes.
- 32 -