Examples; Example 1; Example 2 - H3C SR6604 Manual

Where,
•
interface-type—Type of the interface such as GE port and serial port.
•
X—Number of the slot where the FIP/SAP resides, in the range of 2 to 3 on the SR6604 and 2 to
5 on the SR6608.
•
Y—Number of the slot where the HIM/MIM/MIC/MIC-X resides on the FIP. For a SAP, the
subslot number is 0.
•
Z—Number of the interface on the HIM/MIM/MIC/MIC-X or on the SAP.
For each interface type on a HIM/MIM/MIC/MIC-X or SAP, the number
NOTE:
• Different interface modules on the same FIP have the same slot number.
• Different interfaces on the same HIM/MIM/MIC/MIC-X have the same subslot number.

Examples

Example 1

A MIM-2GBE module is installed on a FIP-110 in slot 3 of the router.
•
Fixed GigabitEthernet interfaces 0 and 1 on the FIP-110 are numbered GigabitEthernet 3/0/0
and GigabitEthernet 3/0/1, respectively.
NOTE:
The subslot number
•
If the MIM-2GBE module is installed in slot 1 of the FIP-110, the two GigabitEthernet interfaces
0 and 1 on the MIM-2GBE are numbered GigabitEthernet 3/1/0 and GigabitEthernet 3/1/1,
respectively,
•
If the MIM-2GBE module is installed in slot 2 of the FIP-110, the two GigabitEthernet interfaces
0 and 1 on the MIM-2GBE are numbered GigabitEthernet 3/2/0 and GigabitEthernet 3/2/1,
respectively.

Example 2

A HIM-4GBE module is installed on a FIP-210 in slot 3 of the router.
•
The two fixed GigabitEthernet interfaces 0 and 1 on the FIP-210 are numbered GigabitEthernet
3/0/0 and GigabitEthernet 3/0/1, respectively.
•
If the HIM-4GBE is installed in slot 1 of the FIP-210, the GigabitEthernet interfaces 0 and 3 on
the HIM-4GBE are numbered GigabitEthernet 3/1/0 to GigabitEthernet 3/1/3, respectively.
•
If the HIM-4GBE is installed in slot 2 of the FIP-210, the GigabitEthernet interfaces 0 and 3 on
the HIM-4GBE are numbered GigabitEthernet 3/2/0 to GigabitEthernet 3/2/3, respectively.
of fixed GE interfaces on a FIP is 0.
Y
4-4
starts from 0.
Z