Fip-300 - H3C SR6604 Manual

(1) Captive screw
(3) Slot 3
(5) Slot 1
Technical specifications
Item
Memory type and size
Drive
MIM
HIM
MIC
MIC-X
Hardware encryption
Hot swapping

FIP-300

The FIP-300 provides twelve combo interfaces. It supports HIMs, MIMs, or a mix of HIMs and MIMs.
Front panel
Figure2-16 FIP-300 front panel
7 6
(1) HIM/MIM slot
(3) GE0 through GE11 fiber ports
(5) GE0 through GE11 copper ports
(7) Captive screw
Technical specifications
Item
Flash
Memory type and size
NVRAM
Specification
4GB DDR4
(Optional) 512 GB mSATA SSD
NOTE:
The mSATA hard disk with SSC enabled is not supported on the FIP-260.
Not supported
Not supported
Not supported
A maximum of 4
Supported
Supported
1
Specification
8 MB
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
The SDRAMs must be used in pairs and must be the same size.
128 KB
2-19
(2) Slot 4
(4) Ejector lever
(6) Slot 2
2
3
5
(2) GE0 through GE11 copper port status LEDs
(4) RUN LED
(6) Ejector lever
4