H3C SR6604 Manual page 35

Operation
Connect network cables
Connect optical fibers
Technical specifications
Item
Flash
Memory type and size
NVRAM
Combo interfaces
HIM
MIM
MIC
Hardware encryption
Hot swapping
Combo interface specifications
Specifications of combo interfaces on the FIP-210 and the FIP-110 are the same. For more
information, see
FIP-240
The FIP-240 provides two combo interfaces. It supports HIMs, MIMs, or a mix of HIMs and MIMs.
Front panel
Figure2-14 FIP-240 front panel
(1) Slot 4
(3) Combo interface 1
(5) Slot 1
Reference
Specification
4 MB
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
2
2 copper ports (automatic
MDI/MDIX)
2 fiber ports
2 HIMs supported
2 MIMs supported
Not supported
Supported
Supported
Table2-19 and Table2-20.
1
6
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex
2
5
(2) Slot 3
(4) Combo interface 0
(6) Slot 2
2-17
3
4