H3C SR6604 Manual page 80

LED
Status LEDs for
2
SFP+ port 0 and
SFP+ port 1
(yellow/green)
Status LEDs for
fiber combo
3
ports GE16 to
GE19
(yellow/green)
Status LEDs for
copper combo
4
ports GE16 to
GE19
(yellow/green)
Status LEDs for
SFP ports GE0
to GE15
(yellow/green)
Figure3-26 SAP-28GE LEDs
Status
Fast flashing (8
Hz)
Off
Steady green
Flashing green
Steady yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
4
3-21
Description
System software is being loaded or the
SAP-20GE2XP is not operating.
CAUTION:
To avoid hardware damage, do not power off
the router, or insert or remove the
SAP-20GE2XP when system software is being
loaded.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10
Gbps.
The transceiver module has failed to be
detected.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100
Mbps.
3 2
1