Fip-660 - H3C SR6604 Manual

Item
HIM
MIM
MIC
Hardware encryption
Hot-swapping
Combo interface specifications
Specifications of combo interfaces on the FIP-600 and the FIP-110 are the same. For more
information, see

FIP-660

A FIP-660 provides four MIC-X interface module slots. When installing a FIP-660, if a service module
slot adjacent to the FIP-660 is empty, install an air deflector over the slot. For information about
installing an air deflector, see H3C SR6604[6608] Routers Installation Guide.
Front panel
Figure2-20 FIP-660 front panel
1
(1) Captive screw
(3) Slot 3
(5) Slot 1
Specification
2 copper ports (automatic
MDI/MDIX)
2 fiber ports
2
Not supported
Not supported
Supported
Supported
Table2-19 and Table2-20.
2
6
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex
3
5
(2) Slot 4
(4) Ejector lever
(6) Slot 2
2-24
4