Front panel
Figure2-12 FIP-110 front panel
7
(1) Slot 4
(4) Combo interface 0
(7) OPEN BOOK mark
The OPEN BOOK mark indicates that the operator must read the following document before working
with the FIP:
Table2-18 References for FIP operations
Operation
Install and remove the FIP
Install and remove MIMs
Connect network cables
Connect optical fibers
Technical specifications
Item
Flash
Memory type and size
NVRAM
Combo interfaces
HIM
MIM
MIC
Hardware encryption
Power consumption
Hot-swapping
1
6
(2) Slot 3
(5) Slot 1
Reference
H3C SR6604[6608] Routers Installation Guide
Specification
4 MB
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
2
2 copper ports (automatic
MDI/MDIX)
2 fiber ports
Not supported
4 MIMs supported at the same time
Not supported
Supported
75 W
Supported
2-15
2
3
5
4
(3) Combo interface 1
(6) Slot 2
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex