H3C SR6604 Manual page 74

Figure3-16 FIP-260 LEDs
Table3-12 FIP-260 LED description
LED
1
RUN
(green)
Figure3-17 FIP-300 LEDs
Table3-13 FIP-300 LED description
LED
GE0 through
1
GE3
(yellow/green)
SFP0 through
2
SFP11
(yellow/green)
3
RUN
(green)
Status Description
Off No power input is available or the FIP-260 has failed.
Fast flashing (8
System software is being loaded.
Hz)
Steady green The FIP software system is starting up.
Slow flashing (1
The FIP is operating correctly.
Hz)
1
Status Description
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 10/100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 10/100 Mbps.
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow POST has failed.
Off No power input is available or the FIP-300 has failed.
Slow flashing (1
The FIP is operating correctly.
Hz)
System software is being loaded. To avoid damage to
Fast flashing (8
the FIP, never power off the device or hot-swap the
Hz)
FIP while the system software is being loaded.
3-15
1
2
3