Sap-Xp4Ge32 - H3C SR6604 Manual

Item
Hot swapping
Fixed Ethernet port specifications
Table2-32 SFP port specifications
Item
Connector type
Transceiver module type
Network synchronization
1588v2.2 protocol
Interface standards
Operating mode
Table2-33 Copper combo port specifications
Item
Connector type
Interface type
Frame format supported
Interface speed and duplex
mode
For the fiber combo port specifications, see Table2-32.

SAP-XP4GE32

Front panel
Figure2-28 SAP-XP4GE32 front panel
1
(1) Captive screw
Specification
•
•
Supported.
Specification
RJ-45
Auto MDI/MDI-X
•
Ethernet_II
•
Ethernet_SNAP
10 Mbps auto-sensing
100 Mbps auto-sensing
1000 Mbps auto-sensing
2
Copper port—Straight-through/crossover autosensing:
10/100 Mbps, half/full-duplex.

1000 Mbps, full-duplex.

Fiber port—1000 Mbps, full-duplex.
Specification
LC
SFP
Supported
Supported
802.3, 802.3u, and 802.3ab
1000 Mbps, full duplex
3
(2) 10/100/1000Base-T Ethernet copper ports GE0 to GE11
2-32
Half/full duplex, auto-negotiation
Half/full duplex, auto-negotiation
Full duplex, auto-negotiation
4
5
7 6