Him/Mim/Mic/Mic-X Leds - H3C SR6604 Manual

Table3-23 SAP-XP4GE32 LED description
LED
1 2
(yellow/green)
3 4
(yellow/green)
5
(green)
6
(green)

HIM/MIM/MIC/MIC-X LEDs

For HIM/MIM/MIC/MIC-X LED description, see H3C SR6600/SR6600-X Routers Interface Module
Guide.
•
GE0 through
GE11
•
GE12 through
GE23 (copper
combo port)
•
SFP12 through
SFP23 (fiber
combo port)
•
SFP24 through
SFP31
SFP+32 through
SFP+35
RUN
Status
Off
Steady yellow
Flashing yellow (8 Hz)
Steady green
Flashing green (8 Hz)
Off
Steady yellow
Flashing yellow (8 Hz)
Steady green
Flashing green (8 Hz)
Off
Steady green
Flashing green (8 Hz)
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
3-23
Description
No power input is available or the
port has failed.
A 10/100 Mbps link is present.
Data is being received or transmitted
at 10/100 Mbps.
A 1000 Mbps link is present.
Data is being received or transmitted
at 1000 Mbps.
No link is present.
A 100 Mbps link is present.
Data is being received or transmitted
at 100 Mbps.
A 1000 Mbps link is present.
Data is being received or transmitted
at 1000 Mbps.
No link is present or the port is faulty.
A 10 Gbps link is present.
Data is being received or transmitted
at 10 Gbps.
No power input is available or the
SAP-XP4GE32 has failed.
The SAP-28GE is operating
correctly.
System software is being loaded or
the SAP-28GE is not operating.
CAUTION:
To avoid hardware damage, do not
power off the router, or insert or
remove the SAP-28GE when system
software is being loaded.