H3C SR6604 Manual page 81

Table3-22 SAP-28GE LED description
LED
RUN
1
(green)
Status LEDs
for fiber
2
combo ports
GE16 to
(yellow/green)
GE27
Status LEDs
for copper
3 combo ports
GE16 to
(yellow/green)
GE27
Status LEDs
4
for SFP ports
GE0 to GE15
(yellow/green)
Figure3-27 SAP-XP4GE32 LEDs
1
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
3
2
3-22
Description
No power input is available or the SAP-28GE
has failed.
The SAP-28GE is operating correctly.
System software is being loaded or the
SAP-28GE is not operating.
CAUTION:
To avoid hardware damage, do not power off
the router, or insert or remove the SAP-28GE
when system software is being loaded.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at
10/100 Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100
Mbps.
4
5
6