Rpe-X3 - H3C SR6604 Manual

Item
Management Ethernet port
CF card
USB ports
Dimensions (H × W × D)
Power consumption
Reset button
Hot swapping
NOTE:
• The flash memory stores the BootWare image.
• The SDRAM stores the running configuration and buffers data during data forwarding.
• The non-volatile random access memory (NVRAM) stores system exception logs.
• The CF card stores system software image and configuration files.

RPE-X3

Figure2-2 RPE-X3 MPU
(1) USB port
(3) MPU status LEDs
(5) USB console port
Table2-2 RPE-X3 specifications
Item
Flash
Memory type and size
NVRAM
Console port
Specification
9600 bps (default) to 115200 bps
1 (10Base-T/100Base-TX/1000Base-T)
•
256 MB by default for the built-in CF card
•
256 MB, 512 MB, or 1 GB for an optional external CF card (CF cards less
than 256 MB are not supported)
2 (USB 0: Type A connector, operating in the host mode; USB 1: Type B
connector, operating in the device mode)
40 × 199 × 282 mm (1.57 × 7.83 × 11.10 in)
37 W
1
Supported
1 2 3
6 5
(2) Management Ethernet port (MANAGEMENT)RUN LED
(4) Reset button (RESET)
(6) Console/AUX port (CONSOLE/AUX)
Specification
8 MB
•
Default—One 1-GB DDR2 SDRAM
•
Maximum—Two 1-GB DDR2 SDRAMs
128 KB
1
9600 bps (default) to 115200 bps
Supports switching to AUX port
2-2
4