H3C SR6604 Manual page 69

LED
(red)
LINK
7
ACT
SFP0 through
SFP3
8
(yellow/green)
Figure3-7 MCP-X2 LEDs
1
Table3-8 MCP-X2 LED description
LED
GE0 through
1
GE3
(yellow/green)
CF
2
(yellow/green)
Status
Steady on
Off
Steady green
Steady yellow
Off
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
9 8
Status
Off
Steady green
Flashing green
Steady yellow
Flashing
yellow
Off
Steady green
Flashing green
Steady yellow
3-10
Description
A fault has occurred on the system or the
available power is insufficient. In this state, check
the system log immediately.
The corresponding interface is not connected.
A 1000 Mbps link is present.
A 10/100 Mbps link is present.
No data is being received or transmitted.
Data is being received or transmitted.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100
Mbps.
2
7 7
Description
The corresponding interface is not connected.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No CF card is present or the CF card is not
recognizable.
A CF card is in position and has been detected.
The system is accessing the CF card. In this state,
do not remove the CF card.
A CF card not provided by H3C.
3
4
5
５
6