Scene Controller
Use the scene controller to fade from one scene into another. The controller's central
position (click-stop) corresponds to Scene 2.
For example, assume that the VP1 has stored the following three scenes.
Scene 1
MODULATION
MODULATION
1 wheel
Scene 2
MODULATION
MODULATION
1 wheel
Scene 3
MODULATION
MODULATION
1 wheel
In this situation, the SCENE CONTROLLER continuously changes the various
controller settings as illustrated in the figure on the next page. When the SCENE
CONTROLLER knob is in the position shown, the effective controller settings will be
as shown directly above it (along the dotted line).
Foot
2 wheel
controller 1
Foot
2 wheel
controller 1
Foot
2 wheel
controller 1
(other controllers)
(other controllers)
(other controllers)
BASICS
Chapter 3 Learning the Basics
Scenes
3 - 12