No effects
Problems caused by Inappropriate system settings
No sound
Every alternate note on the keyboard fails to play.
Keys don't produce the expected pitch.
Controllers don't provide expected control.
Key-strike force does not affect velocity.
• Remember that the VP1 does not apply effects to the signals going to the ELEMENT
jacks. Effects are only applied to signals to the OUTPUT jacks.
• Check that the "Local" parameter is set to "on".
• If you are trying to drive the VP1 from an external MIDI: does the transmit channel
of the external device match the receive channel on the VP1?
• The Note On/Off parameter is probably set to "odd" or "even". Change the setting to
"all".
• Check the setting of the "Keyboard Transpose" parameter.
• Check the setting of the "Master Tune" parameter.
• Is voice microtuning affecting the pitch?
• Are controllers firmly connected?
• Have you changed the Assignable Controller settings?
• Remember that when "Controller Hook" is "on", controllers do not become effective
until they move past the corresponding internal controller settings.
• Have you selected an appropriate velocity curve?
• The "Fixed Velocity" parameter may be set to a value other than "off".
Troubleshooting
(
REFERENCE: 2-8)
(
REFERENCE: 2-8)
(
REFERENCE: 2-8)
(
REFERENCE: 2-6)
(
REFERENCE: 2-4)
(
REFERENCE: 1-28)
(
BASICS: 1-10)
(
REFERENCE: 2-10)
(
BASICS: 2-4)
(
REFERENCE: 2-6)
(
REFERENCE: 2-6)
REFERENCE
Appendix
App - 6