Connecting Amplifiers Or Mixer - Yamaha VP-1 Owner's Manual

Connecting Amplifiers or Mixer

The VP1 produces audible output via amplifiers, mixers, or other such sound-
reproducing devices. For private listening, you can simply plug a set of stereo
headphones into the unit's headphone jack.
Amplifiers
Connect one amplifier to the L/MONO OUTPUT jack, and another to the R OUTPUT
jack. For monaural operation, connect to the L/MONO jack only.
YAMAHA MODEL VP1
AC INLET
POWER
ON/ OFF
MS60S
Mixer
Connect each OUTPUT jack to a channel on the mixer. The channel connected to the
L/MONO jack becomes the left pan; the channel connected to the R jack becomes the
right pan. Note that you can make the same kind of connection to an MTR (CMX
series), cassette deck, or similar such audio device.
YAMAHA MODEL VP1
AC INLET POWER
ON/ OFF
MV1602
ELEMENT 4 ELEMENT 3 ELEMENT 2 ELEMENT 1 OUTPUT
R L/MONO R L/MONO R L/MONO R L/MONO R L/MONO
OUTPUT
R L/MONO
OUTPUT R OUTPUT L
PORTAMENTO SUSTAIN
ELEMENT 4 ELEMENT 3 ELEMENT 2 ELEMENT 1 OUTPUT
R L/MONO R L/MONO R L/MONO R L/MONO R L/MONO
OUTPUT
R L
OUTPUT R
INPUT(PAN=R)
INPUT(PAN=L)
Connecting the System
PORTAMENTO SUSTAIN FOOT CONTROLLER FOOT VOLUME SCENE MIDI
2 1 THRU OUT IN
Rear panel
MS60S
FOOT CONTROLLER MIDI
FOOT VOLUME SCENE
2 1 THRU OUT IN
Rear panel
OUTPUT L
BASICS
Chapter 1 Setting It Up
1 - 12