Moving The Cursor; Selecting A Function; Returning To Previous Screen - Yamaha VP-1 Owner's Manual

Selecting a Function

Returning to Previous Screen

Moving the Cursor

The bottom line of the screen displays the names of the functions that are currently
available for selection. You can select any of these functions by pressing the function
button ( ~
F1 F8
For example, assume that you have just entered PLAY mode, so that the screen
appears as shown below.
The line along the bottom of the screen shows eight functions available for selection.
Pressing , for example, selects the "Info" function, switching the LCD to the
F1
Information Display screen shown below.
FYI
Function names shown on the bottom line of the display may be enclosed in (parentheses),
[brackets], or {curly brackets}. The meaning of each of these is as follows.
• Parentheses: The function will remain on only while you hold the function button down.
• Brackets: The function invokes a submode.
• Curly brackets: The function executes some action.
Pressing a function button causes the screen to change to the corresponding display.
When you are finished with the function, you can switch back to the original screen by
pressing .
EXIT
For example, pressing
Display" (second illustration above) will return you to the initial PLAY-mode screen
(first illustration above).
Pressing a mode button (
selected mode's initial or previously displayed screen.
Each screen allows you to make various settings. To select the item you want to set,
use the cursor buttons (
A few screens are too large to fit completely on the LCD. You can scroll vertically
through these screens using the
) located directly under the displayed function name.
while the screen is displaying the "Information
EXIT
, , or
PLAY SYSTEM DISK
) to move the cursor to the item.
and cursor buttons.
Basic Operations
) switches the display to the
BASICS
Chapter 3 Learning the Basics
3 - 24