Voice Setup - Yamaha VP-1 Owner's Manual

VOICE SETUP

: VSet
PLAY F6
Sets a wide range of parameters for each voice element.
For details about settings, refer to descriptions
starting on the next page.
Description
• The VOICE SETUP function implements detailed settings for each element.
Settable parameters are described sequentially (in the order in which they appear
on the display) starting from the next page. (
• The full list of parameters is too long to fit on the LCD. You can scroll through the
list in either of two ways, as follows.
Use the and
Press : or
F2
lines).
• You can use the
F1
into the voice that you are working on. (
• As you scroll through the parameter list, you will notice a dividing line ("-----")
between the "MicroTune" and "PortaMode" parameters. When you copy an
element, all parameters listed below the line are copied along with the element.
Parameters above the line are not copied.
• Press or
EXIT PLAY
• To switch to another PLAY-mode function, press
FYI
• Markings at the upper left of the LCD indicate the direction in which scrolling is possible. A
marking indicates that you can scroll downward only;
scroll in either direction;
REFERENCE: 1-17 to 1-40)
cursor buttons to scroll one line at time.
: to scroll back or ahead by one page (four
F3
:[ECpy] function to copy an element from another voice
REFERENCE: 1-38)
to return to the main PLAY-mode screen.
means that you can scroll upward only.
Editing Functions
, , or
F4 F5 F7
means that you can
REFERENCE
Chapter 1 PLAY Mode
.
1 - 16