Yamaha VP-1 Owner's Manual page 15

（6）
PLAY SYSTEM
VOLUME
（9）
(6) PLAY button
SYSTEM button
DISK button
Each button selects the corresponding mode. The PLAY button always
switches the display to the initial PLAY screen. (
(7) STORE button
Stores an edited voice to internal memory, or copies an existing voice to
another location (a different "voice number"). (
(8) COMPARE button
Use this button to compare the sound of the voice you are editing with the
sound of the same voice before editing began. (
(9) VOLUME slider
Adjusts the output volume. Note that this slider has no effect on the output
levels at the ELEMENT jacks.
(10) CS1 and CS2 (Continuous sliders)
These sliders provide real-time control of voice parameters during
performance. Actual effects differ for each voice.
(11) SCENE 1, SCENE 2, and SCENE 3 buttons
The VP1 memorizes up to three complete sets of controller settings, or
"scenes". Pressing one of the SCENE buttons reestablishes the
corresponding set of controller settings.
(12) SCENE CONTROLLER
Use this controller to slide continuously from one scene into another. The
center click-stop position selects Scene 2. (
（7）（8）
DISK STORE COMPARE
CS 1 CS 2
（10）
Controls and Connectors
（11）
SCENE 1 SCENE 2 SCENE 3
SCENE CONTROLLER
（12）
BASICS: 3-22)
BASICS: 3-28)
BASICS: 3-38)
BASICS: 3-12)
BASICS
Chapter 1 Setting It Up
1 - 3