Changing Numerical Settings; Changing Multiple-Choice Settings - Yamaha VP-1 Owner's Manual

Changing Numerical Settings

Changing Multiple-Choice Settings

Once you have moved the cursor to the item you need to set, you are ready to make the
setting.
To change a numerical setting, proceed as follows.
Using the dial
Rotate clockwise to increase the value, or counterclockwise to lower it. Speed of
rotation determines how quickly the value changes.
Using and
INC/YES DEC/NO
Press briefly to increment the value by 1, or hold the button down to
INC/YES
increment continuously. Press
decrement continuously.
To set a multiple-choice item, you move through the possible selections until you
reach the one you want.
The following screen, for example, allows you to make controller assignments for
each element. Notice that the cursor is currently at the controller assigned to Parameter
1 of Element 1. The current setting is MW1 — but you can change this to some other
controller (such as MW2 or FC1), or you can select "on" or "off".
To make your selection, proceed as follows.
Using the dial
Turn the dial to move through possible selections.
Using and
INC/YES DEC/NO
Press or hold down the appropriate button to move through the selections.
to decrement the value by 1, or hold it down to
DEC/NO
Chapter 3 Learning the Basics
Basic Operations
BASICS
3 - 25