Controller Assign Table: Control Range - Yamaha VP-1 Owner's Manual

CONTROLLER ASSIGN TABLE: Control Range

: CTbl
PLAY F4
Determines the degree by which a parameter value changes in response to controller movement.
Max
Center
Min
: [Rng]
F1
0 ~ 127
0 ~ 127
0 ~ 127
Description
• This function sets the amount by which the parameter value changes in response to
controller movement. The control range is determined by the following three
values.
Max: The value that the parameter takes when the controller is at its maximum
position. The controller's maximum position is represented by the number
127. (For example, the foot controller is in this position when it is fully
depressed.)
Center: The value the parameter takes when the controller is at its center position
(controller value = 64). (For example, the MODULATION 2 wheel takes
this value when at its click-stop position.)
Min: The value the parameter takes when the controller is at its minimum
position of "0". (For example, the foot controller is in this position when it
is fully raised.)
127
64
Controller value
0
S1 S2
• The "S1", "S2", and "S3" items in the display indicate the controller settings
recorded for scenes 1, 2, and 3. The "Cr" item indicates the current internal
controller setting. Note that these four items do not appear on the Control Range
screen for the velocity controller.
110
55
20
S3 Cr TG
Editing Functions
Max
Parameter value received
when controller is at
maximum position.
Center
Parameter value received when
controller is at center position.
Min
Parameter value received when
controller is at minimum position.
REFERENCE
Chapter 1 PLAY Mode 1 - 12