Voice Setup: Note Shift - Yamaha VP-1 Owner's Manual

VOICE SETUP: Note Shift

: VSet
PLAY F6
Sets tuning for each element, in semitone increments.
NoteShift
Move cursor to NoteShift.
-48 ~ +48
Description
• Sets the number of semitones by which the element's pitch is raised or lowered. A
positive value raises the pitch; a negative value lowers it.
• The window at the right of the screen displays the current settings graphically.
Elements that are "off" are indicated as "------".
Important
• For some elements, extreme settings may produce disagreeable results: the pitch
may sound incorrect, or the element may become inaudible.
• You cannot set a note-shift value for elements whose Element Switch is "off". (
REFERENCE: 1-17)
FYI
• If you set different values for the different elements of a voice, each key on the keyboard will
produce a multipitched, chord-like sound.
• To alter pitch by smaller increments, use the Detune setting described on the preceding page.
• You can use the 1
12
buttons to toggle elements on and off during editing.
~ 4 buttons to switch among elements, and the
Editing Functions
9 ~
REFERENCE
Chapter 1 PLAY Mode 1 - 24