Output/Mixer - Yamaha VP-1 Owner's Manual

OUTPUT/MIXER

: Out
PLAY F7
Sets levels for send-to-effects, direct-output, and return-from-effects signals.
Send (EL1 ~ EL4)
Drct (EL1 ~ EL4)
Rtrn
0 ~ 127
0 ~ 127
0 ~ 127
Description
• This function sets the direct-output and send-to-effects levels for each element. It
also sets the voice's return-from-effects level.
• This function also serves as the gateway to the OUTPUT/EFFECT PARAMETER
and OUTPUT/EQ EDIT screens, which you use to set the effects parameters and
the equalizer. The calling relationship between the three screens is illustrated
below.
OUTPUT screens
F8 （EF）
OUTPUT/MIXER screen
• Send: Sets the level for each element's send-to-effects signal — the signal going
into the effects block. The "knobs" along the top of the displayed graphic reflect
the current settings.
• Drct: Sets the level for each element's direct-output signal. This signal bypasses
the effects block and moves directly to the equalizer. The "sliders" in the displayed
graphic reflect the current settings.
• Rtrn: Sets the level for the return-from-effects signal — the signal returning from
the effects block. The "knob" at the right of the graphic reflects the current setting.
Element 1
Element 2
Element 3
Element 4
F8 （EQ）
OUTPUT/EFFECTS screen
F8 （Mix）
Send
Rtrn
Drct
Editing Functions
OUTPUT/EQ screen
: stereo signal
Final output
REFERENCE
Chapter 1 PLAY Mode 1 - 41