Voice Setup: Receive Channel - Yamaha VP-1 Owner's Manual

VOICE SETUP: Receive Channel

: VSet
PLAY F6
Sets the MIDI receive channel for each element.
RCh
Move cursor to RCh.
basic, 1 ~ 16
Description
• Designates the MIDI receive channel for each element. External MIDI data
arriving over the designated channel will drive the element's sound.
• If the setting is "basic" (the usual setting), the SYSTEM mode's "Basic Receive
Channel" parameter selects the receive channel. (
• Use the numerical settings (1 ~ 16) when you want to allocate specific MIDI
channel(s) to specific elements. This allows you to have different channels driving
different elements.
• The window at the right of the screen lists the current channel settings. If the
element is "off", the setting is listed as "------".
Important
• You cannot set a receive channel for an element whose Element Switch is "off". (
REFERENCE: 1-17)
FYI
• By setting all elements to different values, you can have the VP1 produce four
separate "voices" in response to incoming MIDI data.
• You can use the
1
~ buttons to toggle elements on and off during editing.
9 12
~ buttons to switch among the elements, and the
4
Editing Functions
REFERENCE: 2-8)
REFERENCE
Chapter 1 PLAY Mode 1 - 19