Yamaha VP-1 Owner's Manual page 142

LOAD ALL DATA
Insert the disk
DISK
Loads all data from the disk.
no settings
: Lall
F1
Description
• This operation copies all floppy-disk data — one file, containing 64 voices and
system data — into the VP1's internal memory. Note that "system data" refers to
the settings implemented in SYSTEM mode.
• Press EXIT or PLAY
• Press ~
F2 F6
Important
• The VP1 will not perform this operation if Memory Protect (
13) is set "on".
• This operation overwrites all data currently existing in the VP1's internal memory.
If you want to retain this original data, you must save it to a different floppy disk
( REFERENCE: 3-9) before starting the load operation.
Procedure
1. Check that the appropriate filename is displayed at the top right of the
screen.
2. Press .
ENTER
The screen displays the "Are you sure?" query.
3. To proceed, press
If you do not want to proceed, press
and return to the previous screen.
When you press
"Now loading!" message appears on the display. When loading is finished,
the screen displays the "Completed!" message.
4. Press .
EXIT
The VP1 returns to PLAY mode.
to return to PLAY mode.
to change to another DISK-mode function.
.
INC/YES
or
DEC/NO
, the VP1 begins loading. After a few moments the
INC/YES
DISK Functions
REFERENCE: 2-
to cancel the operation
EXIT
REFERENCE
Chapter 3 DISK Mode
3 - 4