Rename - Yamaha VP-1 Owner's Manual

RENAME

Insert the disk
DISK
Changes a filename.
Filename: Eight characters or less
: Rnam
F5
Description
• This operation changes the name of the save file stored on the floppy disk.
• Press or
EXIT PLAY
• Press ~
F1 F4
Important
• You cannot change the filename if the disk's write-protect tab is set to "protect".
The tab, located at the lower-right corner on the rear side of the disk casing, is in
"protect" position when it is pushed downward so that the window is open.
• Filenames cannot start with a space. If you enter a space in the middle of a
filename, the space is automatically converted to an underscure character. (If you
enter the name as a string of spaces, the name automatically converts to "------").
Procedure
1. Enter the new filename.
For instructions about how to enter filenames, refer to the BASICS section. (
BASICS: 3-26)
2. Press .
ENTER
The screen displays the "Are you sure?" query.
3. To proceed, press
If you do not want to proceed, press
and return to the previous screen.
When renaming is finished, the "Completed!" message appears on the
LCD.
4. Press .
EXIT
The VP1 returns to PLAY mode.
to return to PLAY mode.
or to change to another DISK-mode function.
F6
.
INC/YES
DEC/NO or
DISK Functions
EXIT to cancel the operation
REFERENCE
Chapter 3 DISK Mode
3 - 11