Yamaha VP-1 Owner's Manual page 25

ELEMENT jacks
You can connect each of the ELEMENT jacks to a different mixer channel. (For
monaural operation, connect the four L/MONO outputs only.) By also connecting the
two OUTPUT jacks to the mixer, you can get up to ten channels of output at one time.
YAMAHA MODEL VP1
AC INLET POWER
ON/ OFF
Important
• Never connect OUTPUT jacks to the microphone inputs of external amps or
cassette decks. Connecting through the microphone input can degrade sound
quality and may damage the external device. If you are connecting to a mixer, set
the mixer channels for "line input."
• Remember that the VOLUME slider, effects settings, and equalizer settings do not
affect output coming from the VP1's ELEMENT jacks.
• Quick Edit effects do not operate on output from the VP1's ELEMENT jacks.
FYI
• The VP1 is normally used to produce stereo sound (two channels). For professional
applications you can use the two channels from the OUTPUT jacks, in combination with the
eight channels from the ELEMENT jacks.
PORTAMENTO SUSTAIN
ELEMENT 4 ELEMENT 3 ELEMENT 2 ELEMENT 1 OUTPUT
R L/MONO R L/MONO R L/MONO R L/MONO R L/MONO
MV1602
Connecting the System
FOOT CONTROLLER MIDI
FOOT VOLUME SCENE
2 1 THRU OUT IN
Rear panel
BASICS
Chapter 1 Setting It Up
1 - 13