Innovative Controller Types - Yamaha VP-1 Owner's Manual

Innovative Controller Types

Controllable parameter
Param 1 （MW1）
Param 2 （MW2）
Param 3 （FC1）
Param 4 （FC2）
Param 5 （MBx）
Param 6 （MBy）
Param 7 （CS1）
Param 8 （CS2）
Param 9 （BC）
Param 10 （VEL）
Param 11 （AT）
Param 12 （PB）
Param 13 （TEG）
Here we describe a few of the more distinctive controllers found on the VP1.
Modulation Ball
The modulation ball controls two parameters simultaneously — rotation in the X
direction controls one parameter, while rotation in the Y direction controls the other.
To set the ball in home position (both parameters set to 0), rotate it all the way to the
left and down.
Rotation changes the (X,Y) values as follows:
（0, 127）
You are free to change the control numbers associated with the modulation ball. (
REFERENCE: 2-10)
Continuous sliders
You are free to change the controller numbers used to identify these sliders. (
REFERENCE: 2-10)
Controller
MW1 ：MODULATION 1 wheel
MW2 ：MODULATION 2 wheel
FC1 ：Foot controller 1
FC2 ：Foot controller 2
MBx ：Modulation ball (X direction)
MBy ：Modulation ball (Y direction)
CS1 ：Continuous slider 1
CS2 ：Continuous slider 2
BC ：Breath controller
VEL ：Velocity
AT ：Aftertouch
PB ：Pitch wheel
TEG ：Touch EG
Elements 1 to 4
（127, 127）
（0, 0） （127, 0）
BASICS
Chapter 3 Learning the Basics
Controllers
3 - 9