Yamaha VP-1 Owner's Manual page 95

• If you set PanRngL and PanRngR to equivalent values, the VP1 ignores the
element's preset pan and positions the sound at the specified position, as shown.
Left speaker
• You can invert the preset pan by setting PanRngR to the left and PanRngL to the
right.
PanRngR=-31
Left speaker
• The window at the right of the screen displays the current pan-range settings
graphically. Elements that are "off" are indicated as "------".
Important
• You cannot set the pan range for an element whose Element Switch is "off". (
REFERENCE: 1-17)
FYI
• Note that this function changes the range over which pan acts; it does not change the pan
itself. Actual pan settings are built into each element and are not accessible for editing.
• You can use the 1
12 buttons to toggle elements on and off during editing.
PanRngL=+14 PanRngR=+14
~ 4 buttons to switch among elements, and the
Editing Functions
Right speaker
PanRngL=+31
Right speaker
REFERENCE
Chapter 1 PLAY Mode
9 ~
1 - 26