Voice Setup: Volume - Yamaha VP-1 Owner's Manual

VOICE SETUP: Volume

: VSet
PLAY F6
Sets the volume for each element.
Volume
Move cursor to Volume.
0 ~ 127
Description
• Sets the output level for each element. Larger values correspond to louder output.
• The window at the right of the screen indicates the current volume setting for each
element. If the element is "off", the setting is listed as "------".
Important
• If you set the element's volume to 0, the VP1 will not produce any sound for the
element.
• You cannot set the volume for an element whose Element Switch is "off". (
REFERENCE: 1-17)
FYI
• The signal going to the VP1's OUTPUT jacks is adjusted first according to the volume
setting described here. When the signal reaches the mixer, the level is adjusted again
according to the Mixer volume settings. (
through the effects and equalizer stages before exiting the VP1 at the OUTPUT jacks.
• The signal going to the VP1's ELEMENT jacks is adjusted only by the volume setting
described here. The signal then passes directly to the jacks with no further adjustment.
• You can use the 1
12 buttons to toggle elements on and off during editing.
REFERENCE: 1-41) The signal then moves
~ 4 buttons to switch among elements, and the
Editing Functions
9 ~
REFERENCE
Chapter 1 PLAY Mode 1 - 22