Scene - Yamaha VP-1 Owner's Manual

SCENE

: Scene
PLAY F5
Records a scene into an element, or selects the voice's initial scene.
Initial Scene
EL1 ~ EL4
s1 ~ s3
no change,
s1<->s2, s2<->s3,
s3<->s1,
current>s1, current>s2,
current>s3
Description
• Use this function to select the initial scene, or to register a scene.
• Initial Scene: Establishes S1, S2, or S3 as the initial scene, If the "Controller Init"
parameter is set "on", the VP1 automatically selects the initial scene whenever you
switch into the voice (
• EL1 ~ EL4: Use this area to swap scenes among elements, or to register the current
controller positions into a scene for an element. Refer to the next page for details.
• no change: Select "no change" if you do not want to change the current scene
setting.
• Press EXIT or PLAY
• To switch to another PLAY-mode function, press
Important
• Remember that new scene settings are like all other editing changes: if you forget
to store the edited results to memory, the new settings will be lost when you switch
to a different voice. (
FYI
• To change the number of the initial scene, move the cursor to the "Initial Scene" entry on the
display, then press the appropriate Scene button (
DEC/NO
dial, or press the
• You can use the 1
12
buttons to toggle elements on and off.
REFERENCE: 2-4).
to return to the main PLAY-mode screen.
REFERENCE: 1-54)
SCENE1
INC/YES
or button.
~ 4 buttons to select the element, and the
Editing Functions
F4 , F6 , or F7
, SCENE2 , or SCENE3 ), turn the
9
REFERENCE
Chapter 1 PLAY Mode
.
~
1 - 14