Rear Panel - Yamaha VP-1 Owner's Manual

Rear Panel

YAMAHA MODEL VP1
AC INLET
（1） （2）
POWER
ON/ OFF
(1) Power-cord connector
Connects to the AC power cord supplied with the VP1. (Please do not use
any other power cord with the VP1.)
(2) POWER switch
Press to switch the power ON or OFF. Power is ON when the switch is in
depressed position; OFF when it is in raised position.
(3) ELEMENT jacks: L/MONO, R
Each set of jacks outputs one of the four elements comprising the voice.
Each element is output in stereo: the L/MONO jack outputs the left channel,
and the R jack outputs the right channel. For monaural output, use the L/
MONO jack.
(4) OUTPUT jacks: L/MONO, R
These jacks output the full sound produced by combination of all elements
plus effects. The L/MONO and R jacks output the left and right channels,
respectively. For monaural output, use the L/MONO jack.
ELEMENT 4 ELEMENT 3 ELEMENT 2
R L/MONO R L/MONO R L/MONO
（3）
Controls and Connectors
ELEMENT 1 OUTPUT
R L/MONO R L/MONO
（4）
BASICS
Chapter 1 Setting It Up
1 - 6