Yamaha VP-1 Owner's Manual page 112

OUTPUT/EFFECT
: Out
PLAY F7
Selects the effects and sets their parameters.
Effect Type
Parameter vary ; see below.
: EF
F8
0 ~ 31
Description
• Use this function to select the effects you want to use, and to set the parameter
values for the selected effects.
• You can select from the following effects.
00: Reverb Hall
01: Rev Room 1
02: Rev Room 2
03: Rev Room 3
04: Rev Stage 1
05: Rev Stage 2
06: Rev Plate
07: Rev White Room
08: Rev Tunnel
09: Rev Canyon
10: Rev Basement
11: Early Ref. 1
Aural Exciter is a registered trademark of APHEX Systems Ltd. The Aural
Exciter is manufactured under license from APHEX Systems Ltd.
• Parameters vary for different effects. Refer to the following pages for a description
of effects and parameter settings.
• You can use the
F1
a different voice into the voice you are currently editing. (
• Press :{Type} to move the cursor to the "Effect Type" line.
F3
• Press :EQ to advance to the equalizer setup screen.
F8
( REFERENCE: 1-51)
• Press or
EXIT PLAY
• To switch to another PLAY-mode function, press
Important
• Effects are not applied to the ELEMENT output signals.
FYI
9
• You can use the
12: Early Ref. 2
13: Gate Reverb
14: Reverse Gate
15: Delay L, R
16: Delay L, C, R
17: Stereo Echo
18: Pitch Change 1
19: Pitch Change 2
20: Pitch Change 3
21: Flanger
22: Stereo Flanger
23: Chorus
:[Cpy] function to copy effects and effect parameters from
to return to the main PLAY-mode screen.
12
~ buttons to toggle elements on and off during editing.
Editing Functions
24: Stereo Chorus
25: Symphonic
26: Stereo Symphonic
27: Phaser
28: Stereo Phaser
29: Aural Exciter
30: Rotary Speaker
31: Ring Modulator
REFERENCE: 1-50)
, , or
F4 F5 F6
REFERENCE
Chapter 1 PLAY Mode
.
1 - 43