Yamaha VP-1 Owner's Manual page 138

MISCELLANEOUS SETTINGS
: Misc
SYSTEM F6
Sets the display mode, switches memory protection on or off, and sets the scene-copy mode.
Display
Memory Protect
Scene Copy Mode
normal, reverse
off, on
confirm, swap, no swap
Description
• Use this function to set the display and scene-copy modes, and to switch memory
protection on or off.
• Display: Set this to "normal" for black-on-white display, or to "reverse" for white-
on-black display. (Use the contrast knob to adjust the contrast as necessary.)
• Memory Protect: Set this "on" to disable all load and store operations, thereby
protecting the current contents of internal memory against accidental overwriting.
Set this "off" if you plan to load or store data to internal memory.
• Scene Copy Mode: Determines the processing that occurs during element copying
if the initial scene for the source voice is different from the initial scene for the
destination voice. For details, refer to the explanation of the VOICE SETUP
Element Copy function. (
• Press or
EXIT PLAY
• Press ~
F1 F5
REFERENCE: 1-38)
to return to PLAY mode.
to change to another SYSTEM-mode function.
SYSTEM Functions
REFERENCE
Chapter 2 SYSTEM Mode
2 - 13