Modulation Wheel; Foot Switch; Foot Controller - Yamaha S03 Service Manual

S03
06: PB
yyy: next target value
xxx: current data value
Check that the values change smoothly, with no snags. When the test
is completed, the LCD displays the result (OK or NG).
(Judgment result display)
06: PB
OK
NG
06: PB

7. Modulation Wheel

07: MW
Check that the modulation wheel is working correctly.
(Testing method)
Slide the modulation wheel smoothly from low to high (00 to 127) in
accordance with the LCD display.
07: MW
yyy: next target value
xxx: current data value
Check that the values change smoothly. If operation is normal, the
LCD displays OK and the test terminates.
(Judgment result display)
OK
07: MW
NG No change in display message

8. Foot Controller

08: FC
Check that the foot controller is operating correctly.
30
yyy
xxx
OK
NG
yyy
xxx
OK
(Testing method)
Connect a foot controller to the [FOOT CONTROLLER] jack, and
move the controller smoothly from lowest to highest (00 to 127) in
accordance with the LCD display.
08: FC
yyy: next target value
xxx: current data value
Check that the values change smoothly. If operation is normal, the
LCD displays OK and the test terminates.
(Judgment result display)
08: FC
OK
NG No change in display message

9. Foot Switch

09: FS
Check that footswitch input is working correctly.
(Testing method)
Connect a footswitch to the [FOOT SWITCH] jack, and confirm that
the data value on the LCD changes when you turn the footswitch ON/
OFF.
09: FS
yyy: next target value (on/off)
xxx: current data value (on/off)
If operation is normal, the LCD displays OK and the test terminates.
(Judgment result display)
OK
09: FS
NG No change in display message
10. MIDI IN/OUT/THRU
10: MIDI
yyy
xxx
OK
yyy
xxx
OK