Voice Setup: Portamento Resolution - Yamaha VP-1 Owner's Manual

VOICE SETUP: Portamento Resolution

: VSet
PLAY F6
Sets the resolution of the portamento slide.
PortaReso
Move cursor to PortaReso.
0: smooth, 1: 50cent
2: 100cent, 3: 200cent
4: 400cent
Description
• Selects the resolution (smoothness) of the portamento slide.
• 0: smooth
Pitch slide is continuous.
• 1: 50cent
The pitch changes in quarter-tone increments.
• 2: 100cent
The pitch changes in semitone (minor second) increments.
• 3: 200cent
The pitch changes in full note (major second) increments.
• 4: 400cent
The pitch changes in two-note (major third) increments.
• The window at the right of the screen indicates the current resolution setting for
each element. If the element is "off", the setting is listed as "------".
Important
• The VP1 does not apply portamento if Quick Edit "POR TIME" is set to zero. (
BASICS: 3-18)
• You cannot set the resolution for an element whose Element Switch is "off". (
REFERENCE: 1-17)
• The "smooth" setting utilizes a different curve and speed than the other,
incremental settings.
FYI
1
• You can use the
12 buttons to toggle elements on and off during editing.
4
~ buttons to switch among elements, and the
Editing Functions
9
~
REFERENCE
Chapter 1 PLAY Mode 1 - 31