Yamaha VP-1 Owner's Manual page 146

Procedure
1. Check that the appropriate filename is displayed at the top right of the
screen.
2. Select the source voice by pressing the appropriate bank and program
buttons (
A
buttons, the dial, or the
3. Press :{DST} to move the cursor to the "Destination (Int) Voice
F7
entry.
4. Select the destination voice by pressing the appropriate bank and program
buttons (
A
buttons, the dial, or the
5. Press ENTER .
The screen displays the "Are you sure?" query.
6. To proceed, press
If you do not want to proceed, press
and return to the previous screen.
When you press
"Now loading!" message appears on the display. When loading is finished,
the screen displays the "Completed!" message.
7. Press EXIT .
The VP1 returns to PLAY mode.
~ , ~
D 1
or
INC/YES DEC/NO
~ )( ~
D 1
INC/YES or DEC/NO
.
INC/YES
or
DEC/NO
, the VP1 begins loading. After a few moments the
INC/YES
), or by using the cursor
16
button.
), or by using the cursor
16
button.
to cancel the operation
EXIT
REFERENCE
Chapter 3 DISK Mode
DISK Functions
3 - 8