Output/Equalizer - Yamaha VP-1 Owner's Manual

OUTPUT/EQUALIZER

: Out
PLAY F5
Sets the equalizer.
Low Shelv. Freq.
Gain
Low Mid. Freq.
Gain
Q
High Mid. Freq.
Gain
Q
High Shelv. Freq.
Gain
: EF : EQ
F8 F8
32 Hz ~ 2.0 kHz
-10 ~ +10 dB
160 Hz ~ 6.3 kHz
-10 ~ +10 dB
0.1 ~ 5.0
315 Hz ~ 8.0 kHz
-10 ~ +10 dB
0.1 ~ 5.0
500 Hz ~ 16.0 kHz
-10 ~ +10 dB
Description
• Sets the characteristics of the four-band equalizer. The equalizer uses shelving-
type equalization for the outer two bands (low and high), and picking-type
equalization for the middle two bands (low-mid and high-mid).
• Freq.: Sets the central frequency for the equalizer band.
• Gain: Sets the gain applied to the frequency specified by Freq.
• Q: Sets the bandwidth, relative to the center frequency, over which gain is applied.
Bandwidth decreases as Q increases. Q settings are available only for the low-mid
and high-mid bands.
+10dB
Gain 0dB
-10dB
Low Shelv Freq.
• You can use the
F1
voice. ( REFERENCE: 1-53)
• Press :Mix to return to the mixer setup screen. (
F8
• Press or
EXIT PLAY
• Press ,
F4 F5
Low Mid Freq.
Low Mid Q
High Shelv Gain
Low Mid Gain
Low Shelv Gain
High Mid Freq.
:[Cpy] function to copy equalizer settings from another
to return to the main PLAY-mode screen.
, or to switch to another PLAY-mode function.
F6
Editing Functions
High Shelv Freq.
Freq.
High Mid Gain
High Mid Q
REFERENCE: 1-41)
REFERENCE
Chapter 1 PLAY Mode 1 - 51