Rear Panel - Yamaha MX88BK Owner's Manual

Table of Contents

Advertisement

Controls and Functions

Rear Panel

MX49, MX61
1
MX88
1
1 DC IN jack (page 9)
Connect the supplied power adaptor to this connector.
2 P (Standby/On) switch (page 9)
Press to turn the power On (O) or set to Standby (N).
3 MIDI [IN]/[OUT] terminals (page 33)
MIDI [IN] is for receiving control or performance data
from another MIDI device.
MIDI [OUT] is for transmitting all control, performance
and playback data from this instrument to another MIDI
device.
4 USB terminals
There are two different types of USB terminals, and the
rear panel of the instrument features both.
The USB [TO HOST] terminal is used to connect this
instrument to the computer via a USB cable and allows
you to transfer MIDI data and audio data between the
devices. For information about the Port handled by the
instrument, refer to the "Reference Manual" PDF
document.
The USB [TO DEVICE] terminal is used to connect this
instrument to a USB flash memory via a USB cable. For
details, see pages 23 and 31.
5 [SUSTAIN] jack (page 18)
For connection of an optional FC3A, FC4A, or FC5
Footswitch. When connecting an FC4A or FC5, this also
enables footswitch control over various other functions.
6 [FOOT CONTROLLER] jack (page 18)
For connection of an optional FC7 Foot controller. This
jack lets you continuously control one of various different
assignable functions—including volume, tone, pitch, or
other aspects of the sound.
8
MX49 MX61 MX88 Owner's Manual
2
3
2
3
4
5
4
5
6
7 [AUX IN] (Auxiliary Input) jack (page 25)
The Auxiliary Input stereo mini-jack is used to input audio
from an external audio device. For example, you can use
this jack to connect a portable music player and play
along with your favorite music.
NOTE
Use the external device's volume control to adjust the
desired level balance with this instrument.
8 OUTPUT [L/MONO]/[R] jacks
Line level audio signals are output via these phone jacks.
For monophonic output, use only the [L/MONO] jack.
9 [PHONES] (Headphone) jack
This standard stereo phones jack is for connection to a
set of stereo headphones. The audio output is identical
to that of the OUTPUT [L/MONO]/[R] jack.
6
7
8
7
8
9
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx61Mx88Mx49

Table of Contents