Rear Panel - Yamaha MONTAGE M6 Quick Manual

Rear panel

Connecting
AC outlet
7-1
[STANDBY/ON] switch
Press this switch to set the instrument to On or Standby.
7-2
[AC IN] jack (power cord socket)
Connect the power cord supplied with this instrument.
7-3
USB TO DEVICE terminals
Use these terminals for connecting USB flash drives and USB MIDI keyboards.
When a USB flash drive is connected, the terminal lets you save data created on this instrument to the USB flash drive
and load data from the USB flash drive to the instrument. Sending and receiving data between the USB flash drive and
this instrument can be set from [UTILITY] g Contents g Store/Save (or Load).
When a USB MIDI keyboard is connected, you can use it in the same way as the built-in keyboard of this instrument, as
far as the connected keyboard's specifications allow. For more in-formation, refer to the Operation Manual.
26
MONTAGE M Quick Guide
USB flash drive
External USB MIDI
keyboard
Computer