Rear Panel - Yamaha Harmony Director HD-300 Owner's Manual

Component Names

Rear Panel

1
FC7
1 [FOOT PEDAL] jack.............. pages 31, 33
For connecting the Foot Controller FC7 (sold
separately). You can control the function with your
foot, by assigning either the main volume, hold, start/
stop or record/stop function to the FC7.
2 OUTPUT [L/MONO]/[R] jack......... page 32
This is a standard phone jack that outputs audio
signals. Connect these to an external amplifier or
speaker for outputting the audio at loud levels.
To use with and mono amplifier, only connect to the
[L/MONO] jack.
3 MIC [INPUT] jack, MIC [GAIN] knob
............................................... pages 16, 32
For connecting a commercially available microphone
(with a stereo mini-phone jack and plug-in power
compatibility). When an external microphone is
connected, the internal microphone will be disabled.
Turn the [GAIN] knob to adjust the sensitivity of the
internal microphone and the external microphone.
12
HD-300 Owner's Manual
2
Keyboard amplifier or
monitor speaker
3 4
Microphone USB flash drive
Keyboard amplifier or
monitor speaker
4 USB [TO HOST] terminal....... pages 7, 33
For connecting to a computer using a commercially
available USB cable. When connected, you can send
and receive MIDI and audio data.
5 USB [TO DEVICE] terminal ... pages 7, 33
For connecting a USB flash drive required to use the
recording and file playback functions.
6 DC IN jack ..................................... page 13
For connecting the power adaptor that comes with
this instrument, or one sold separately.
7 Cord hook..................................... page 13
Used to prevent damage to the cord of the AC
adaptor.
5 6 7
AC adaptor
Power outlet