Armrest Height Adjustment Mechanism - Permobil C400 Corpus 3G Lowrider Service Manual

Permobil C400 Corpus 3G Lowrider
Armrest height adjustment
mechanism
For this task the following tools are necessary:
• 1 Allen key 3 mm.
• 1 Allen key 4 mm.
• 1 Allen key 6 mm.
Removal
1. Remove the backrest plates. For a detailed descrip-
tion, see Backrest plates, Page 66.
2. Loosen the two screws holding the plastic cover to
the back of the backrest. Twist the plastic cover
downwards. See fig. 101.
3. Remove the BUS contacts from the contact block and
divide the cabling for the ICS switchbox at the
68
Figure 101. The plastic cover is fixed using two screws.
Figure 102. A. The connector on the ICS switchbox ca-
bling is above the connector block. B. The BUS connec-
tors are mounted on the connector block.
Repairs